Creating a studio background sweep for that “all professional” look is not that difficult. Your attention should be drawn to the object or subject of interest and not the lighting or set-up of the shot. In other words be sure that you lights are pointed directly at your subject and not slightly off to any one side.
Setting up your own studio does not have to be complex or involved! The basics can get confusing if they are not properly explained. I will post some pictures of my studio set-up with unusual equipment so that you can get a visual understanding of how it can work and improvise with your own set-up.
2 lengths of 12.5 feet of paracord, 1 pane of 8″ x 10″ glass, fabric background sweep, Prop for glass and jewelry (cleaning pen cap and a 2 inch ring box), over head structure (Be certain it is sturdy! I used 2 securely installed ceiling light fixtures), tripod, remote shutter release, 2 soft light diffusers, 2 lights, camera and a good macro lens (as well as the obvious batteries and memory card).
I began by taking a length of paracord, tying an overhand knot in the end and inserting it between the wood of the light fixture (pictured on the left) and it’s diffuser. Thus with the pull of gravity and the light weight pull of hanging objects it will be caught in a “pinching” hold.
Be creative while playing around with methods of friction because friction properly applied is your best help and not destructive!
Friction, as illustrated on the left, is holding the light in one place along the paracord. The paracord is looped around the open end of the stand making it easily adjustable along the support line and providing way to adjust the placement of light on the object.
It rarely is a good idea to have hard light shining directly on the object or subject, so I removed the reflective outside of photo reflectors and used the white fabric of the reflector disk as a diffuser. Again I used the convenient open end of the stand from which to hang the reflector disk. The reflector disk must be pulled back so that it covers the “shooting area” where the object or subject is placed. I used a straight pin to gather the reflector disk fabric around the power cord, nicely covering the shooting area of the background sweep.
A note of caution: Be careful of hanging anything heavy on the line. The weakest part of the over head structure in this set-up is the diffuser.
We have discussed how one of our lights is set-up, but there is another light that needs to be set-up at a lower angle and portable to figure out the best position to illuminate the facets of the piece or person in focus.
Let me introduce the “chair mount”. If you are familiar with lashing techniques I used the square lash to secure the light to a chair back making sure that the power cord for the light was long enough to reach any place the light may need to be positioned.
Having extra paracord from lashing the light to the back of the chair, it conveniently became the securing point for the reflector disk.
Now that the studio is ready for some of the smaller details, an 8×10 inch piece of glass (clean from dust and dirt) is a nice addition to reflect an object. Bring in you camera, tripod and objects to photograph and begin to play with object position and camera perspectives. Take your time with the first piece being sure you have properly set your cameras white balance, ISO and shutter speed to properly show off the beauty of your photo’s focus.
Have fun and be creative, because fun and creativity will make a better statement than perfect professional rigidity.